Command Reference WIDS Commands
Platform
Description
N/A
dynamic-blacklist enable
Use this command to enable the dynamic blacklist. Use the no form of this command to disable the
dynamic blacklist.
dynamic-blacklist enable
no dynamic-blacklist enable
Parameter
Description
Parameter Description
no
The parameter indicates that you disable the dynamic blacklist.
Defaults
Dynamic blacklist is disabled by de fault.
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Enable the dynamic blacklist.
Ruijie(config)# wids
Ruijie(config-wids)# dynamic-blacklist enable
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
dynamic-blacklist lifetime
Use this command to configure the dynamic blacklist entry lifetime. Use the no form of this command
to restore the default dynamic blacklist entry lifetime.
dynamic-blacklist lifetime seconds
no dynamic-blacklist lifetime
Parameter
Description
Parameter Description
seconds
The parameter indicates the dynamic blacklist entry lifetime, ranging