Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Link Checking Commands
show running-config
Checks current configuration information.
Platform
Description
This command is supported only on wireless AC and fat AP series.
schedule session wlan
Use this command to apply a scheduling session to a WLAN on fat AP networking topology. Use the
no form of this command to delete the configuration.
schedule session num wlan wid
no schedule session num wlan wid
Parameter
Description
Parameter Description
num
Specifies the ID of the scheduling session to be applied. The range is
from 1 to 64.
wid
Specifies the ID of the WLAN to which the scheduling session is
applied.
The range is from 1 to 4094.
no
Deletes the scheduling time of the specific scheduling session.
Defaults
No scheduling session is configured by default.
Command
mode
Global configuration mode on fat AP networking topology
Usage Guide
Use this command to apply a scheduling session to a WLAN. The scheduling session and WLAN
must have been created. Otherwise, the configuration fails.
Configuration
Examples
The following example applies scheduling session 1 to WLAN 2 on fat AP networking topology.
Ruijie(config)# schedule session 1 wlan 2
Related
Commands
Command Description
show schedule session
Checks configuration information about the
scheduling session.
show running-config
Checks current configuration information.
Platform
Description
This command is supported only on wireless fat AP series.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English