Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
Defaults
The web authentication is IPv4 controlled by default.
Command
mode
WLAN security configuration mode
Usage Guide
This command can be configured only after the web authentication is disabled in WLAN security
mode.
Configuration
Examples
#Configure only IPv6 authentication mode in WLAN 100.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# wlansec 100
Ruijie(wlansec)# web-auth authen-mode ipv6
Ruijie(wlansec)# exit
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported only on wireless products.
web-auth dhcp-check
Use this command to enable the dhcp resource check function. Use the no form of this command to
disable this function.
web-auth dhcp-check
no web-auth dhcp-check
Parameter
Description
Parameter Description
N/A N/A
Defaults
The dhcp resource check function is disabled by default.
Command
mode
Global configuration mode.
Usage Guide
This command supports only the IPv4.
This command takes effect only after the DHCP Snooping is enabled.
Configuration
Examples
# Enable the dhcp resource check function.
Ruijie# configure terminal

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English