Command Reference NFPP Commands
Usage Guide
Use this command without the parameter to clear all monitored hosts.
Configuration
Examples
Ruijie# clear nfpp dhcp-guard hosts vlan 1 interface g0/1
Related
Commands
Command Description
dhcp-guard attack-threshold
Set the global attack threshold.
nfpp dhcp-guard policy
Set the limit threshold and attack threshold.
show nfpp dhcp-guard hosts
Show the monitored host.
Platform
Description
N/A
clear nfpp dhcpv6-guard hosts
Use this command to clear the monitored host isolation.
clear nfpp dhcpv6-guard hosts [ vlan vid ] [ interface interface-id ] [ mac-address ]
Parameter
Description
Parameter Description
vid
Set the VLAN ID.
interface-id
Set the interface name and number.
mac-address
Set the MAC address.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
Use this command without the parameter to clear all monitored hosts
Configuration
Examples
Ruijie# clear nfpp dhcpv6-guard hosts vlan 1 interface g0/1
Related
Commands
Command Description
dhcpv6-guard attack-threshold
Set the global attack threshold.
nfpp dhcpv6-guard policy
Set the limit threshold and attack threshold.
show nfpp dhcpv6-guard hosts
Show the monitored host.
Platform
N/A