Ruijie RG-WLAN Series

Command Reference 802.1X Commands
show dot1x max-req
Use this command to show the maximum number of authentication request retransmissions to the
client.
show dot1x max-req
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the information about the private supplicant:
Ruijie# show dot1x private-supplicant-only
private-supplicant-only:: disabled
Ruijie#
Related
Commands
Command Description
dot1x auth-mode
Set the 802.1x authentication mode.
dot1x max-req
Set the maximum number of authentication
request retransmissions.
dot1x port-control auto
Set the port to participate in authentication.
dot1x reauth-max
Set the maximum number of the supplicant
re-authentications.
dot1x re-authentication
Set the re-authentication attribute.
dot1x timeout quiet-period
Set the time the device waits before
reauthentication.
dot1x timeout re-authperiod
Set the re-authentication period for the
supplicant.
dot1x timeout server-timeout
Set the authentication timeout between the
device and authentication server.
dot1x timeout supp-timeout
Set the authentication timeout between the
device and the supplicant.
dot1x timeout tx-period
Set the retransmission period.
Platform
N/A