EasyManuals Logo

Ruijie RG-WLAN Series Rgos Command Reference

Ruijie RG-WLAN Series
657 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #253 background imageLoading...
Page #253 background image
Command Reference TCP Commands
TCP Commands
ip tcp mss
Use this command to configure the upper limit of the MSS value. Use the no form of this command to
remove the configuration.
ip tcp mss max-segment-size
no ip tcp mss
Parameter
Description
Parameter Description
max-segment-size
Upper limit of the MSS value in the range from 68 to 10000 bytes
Defaults
The upper limit is not set by default.
Command
Mode
Global configuration mode
Usage Guide
This command is used to limit the maximum value of MSS for the TCP connection to be created. The
negotiated MSS cannot exceed the configured value. You can use this command to reduce the
maximum value of MSS. However, this configuration is not needed in general.
Configuration
Examples
Ruijie(config)# ip tcp mss 1300
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported by RGOS 10.3 and later versions.
ip tcp not-send-rst
Use this command to prohibit sending the reset packet when a port-unreachable packet is received.
Use the no form of this command to remove the configuration.
ip tcp not-send-rst
no ip tcp not-send-rst
Parameter
Description
Parameter Description

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals