Ruijie RG-WLAN Series Rgos Command Reference

Command Reference 802.1X Commands
Parameter
Description
Parameter Description
time
Timeout time, 5 minutes by default.
Defaults
The timeout time is 5 minutes by default. This function takes effect when the accounting function is
enabled after the IP address is obtained.
Command
Mode
Global configuration mode.
Usage Guide
Use the show running-config command to view the setting.
Configuration
Examples
The following settings use a private client only:
Ruijie# configure t
Ruijie(config)# dot1x dhcp-before-acct timeout 1
Ruijie(config)# end
Ruijie#
Related
Commands
Command Description
show running-config Views the settings.
Platform
Description
N/A
dot1x max-req
During interaction between the dot1x and the server, the dot1x will send a request to the server
again if it does not receive a response from the server within a certain period of time. Use this
command to set the maximum number of authentication requests sent to the server. Use the no form
of the command to restore it to the default value.
dot1x max-req count
no dot1x max-req
Parameter
Description
Parameter Description
count
Maximum number of authentication requests sent to the server.
Defaults
The default value is 3.
Command
Mode
Global configuration mode.
Usage Guide
Use the show dot1x command to show the 802.1X configuration.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English