Ruijie RG-WLAN Series

Command Reference NFPP Commands
arp-guard scan-threshold
Set the global scan threshold.
nfpp arp-guard enable
Enable the anti-ARP attack function on the
interface.
nfpp arp-guard isolate-period
Set the isolate time.
nfpp arp-guard policy
Set the rate-limit threshold and attack threshold.
nfpp arp-guard scan-threshold
Set the scan threshold.
Platform
Description
N/A
show nfpp dhcp-guard hosts
Use this command to show the monitored host.
show nfpp dhcp-guard hosts [ statistics | [ [ vlan vid ] [ interface interface-id ] [ ip-address |
mac-address ] ] ]
Parameter
Description
Parameter Description
statistics
Show the statistical information of the monitored host.
vid
The VLAN ID.
interface-id
The interface name.
ip-address
The IP address.
mac-address
The MAC address.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the statistical information of the monitored host:
Ruijie# show nfpp dhcp-guard hosts statistics
success fail total
------- ---- -----
100 20 120
The following example shows the monitored host:
Ruijie# show nfpp dhcp-guard hosts
If column 1 shows '*', it means "hardware failed to isolate host".
VLAN interface MAC address remain-time(seconds)
---- --------- ----------- -------------------
1 gi0/2 0000.0000.0001 10