Command Reference 802.1X Commands
dot1x redirect time-out port time-out-interval
no dot1x redirect time-out port
Parameter
Description
Parameter Description
time-out-interval
The timeout time, in seconds. The valid range is 1-10s.
Defaults
The default value is 3.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example set the redirect timeout time as 5s:
Ruijie(config)# dot1x redirect time-out 5
Related
Commands
Command Description
dot1x redirect url Sets the redirect url address.
dot1x redirect for special tcp-destination port
Sets the specific destination port and redirect
the web request for the destination IP.
dot1x redirect num for special source-ip
Sets the allowed number of redirect connection
of the same source.
show dot1x Shows the dot1x redirection information.
Platform
Description
N/A
dot1x redirect num for special source-ip
Use this command to set the allowed number of redirect connection of the same source. Use the no
form of this command to restore to the default value.
dot1x redirect num for special source-ip num
no dot1x redirect num for special source-ip
Parameter
Description
Parameter Description
num
The redirect connection number. The valid range is 1-10.
Defaults
The default value is 1.