Ruijie RG-WLAN Series

Command Reference Dot11 Radio Commands
power local
Use this command to set the transmitting power of a radio.
power local power-value
no power local
Parameter
Description
Parameter Description
no
Deletes the power value.
power-value
Specifies the value of transmitting power. The range is from 1 to 100
percent.
Defaults
The default value is 100.
Command
mode
Dot11radio interface configuration mode
Usage Guide
N/A
Configuration
Examples
# Set the transmitting power of the radio to 50 percent.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# power local 50
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
retries
Use this command to set the retries of long or short frames.
retries { short | long } retries-value
no retries { short | long }
Parameter
Description
Parameter Description
no
Restores the default setting.
short
Specifies the retransmission times of short frames. The range is from
1 to 7.
long
Specifies the retransmission times of long frames. The range is from
1 to 4 times.