Command Reference NFPP Commands
Field Description
Interface(Global) Global configuration
Status Enable/Disable the anti-attack function.
Rate-limit In the format of the rate-limit threshold for the source IP address/ the rate-limit
threshold for the source MAC address/ the rate-limit threshold for the port
Attack-threshold In the same format as the rate-limit.
- No configuration.
Related
Commands
Command Description
ip-guard attack-threshold
Set the global attack threshold.
ip-guard enable
Enable the IP anti-scan function.
ip-guard isolate-period
Set the global isolate time.
ip-guard monitor-period
Set the monitor period.
ip-guard monitored-host-limit
Set the maximum number of the monitored hosts.
ip-guard rate-limit
Set the global rate-limit threshold.
nfpp ip-guard enable
Enable the IP anti-scan function on the interface.
nfpp ip-guard isolate-period
Set the isolate time.
nfpp ip-guard policy
Set the rate-limit threshold and attack threshold.
Platform
Description
N/A
show nfpp ip-guard trusted-host
Use this command to show the trusted host free from being monitored.
show nfpp ip-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show nfpp ip-guard trusted-host
IP address mask
--------- ------
1.1.1.0 255.255.255.0
To Next Page
Loading...
