Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
ip-guard monitor-period seconds
Parameter
Description
Parameter Description
seconds
Set the monitor time, in seconds. The valid range is 180 to 86400.
Defaults
600s
Command
Mode
NFPP configuration mode.
Usage Guide
When the attacker is detected, if the isolate period is 0, the attacker will be monitored by the software
and the timeout time will be the monitor period. During the software monitoring, if the isolate period is
not 0, the software-monitored attacker will be auto-isolated by the hardware and the timeout time will
be the isolate period. The monitor period is valid with the isolate period 0.
If the isolate period has changed to be 0, the attackers on the interface will be removed rather than
being monitored by the software
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard monitor-period 180
Related
Commands
Command Description
show nfpp ip-guard summary
Show the configurations.
show nfpp ip-guard hosts
Show the monitored host list.
clear nfpp ip-guard hosts
Clear the isolated host.
Platform
Description
N/A
ip-guard monitored-host-limit
Use this command to set the maxmum monitored host number.
ip-guard monitored-host-limit number
Parameter
Description
Parameter Description
number
The maximum monitored host number. The valid range is 1 to
4294967295.
Defaults
1000
Command
Mode
NFPP configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English