Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WLAN Basic Configuration Commands
WLAN Basic Configuration Commands
ampdu-retries
In a wireless network, AMPDU software retransmission is adopted to reduce the sub-frame loss. The
more retransmission attempts, the less the package loss. However excessive retransmission attempts
increase the workload of air interfaces, which reduce the immediacy of other packages. So, it is
recommended to configure more retransmission attempts when sub-frame loss frequently occurred.
ampdu-retries times radio radio_id
Parameter Description
times
Set the retransmission times; within the range from 1 to 10.
Parameter
Description
radio-id
ID of the radio to be configured
Defaults
By default, the retransmission times is 10.
Command
Mode
AP configuration mode
Usage Guide
N/A
Configuration
Examples
Example 1: Enter the configuration mode of AP0001 and set the AMPDU software retransmission
times to 5.
Ruijie(config)#ap- config AP0001
Ruieji(config-ap)#ampdu-retries 5 radio radio_id
Command Description Related
Commands
N/A N/A
Platform
Description
Supported by both AC and AP.
ampdu-rts
MPDU RTS protection is able to avoid aggregation conflict on air interface to avoid resource waste.
However, RTS interaction consumes some resources of the air interface which brings about side-effect
to the air interface in most scenario. The function is disabled by default.
[no] ampdu-rts radio radio_id

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English