Command Reference AAA Commands
accounting commands
Use this command to apply a command accounting list to the specified terminal line in line
configruation mode.
Use the no form of this command to disable the command accounting function on the terminal line.
accounting commands level { default | list-name }
no accounting commands level
Parameter Description
level
Specifies the command level for accounting, in the range from 0 to 15.
default
Applies the default command accounting method.
Parameter
Description
list-name
Uses a defined command accounting method list.
Defaults
Accounting is disabled by default.
Command
Mode
Line configuration mode
Usage Guide
Once the default command accounting method list has been configured, it will be applied to all
terminals automatically. If a non-default command accounting method list has been applied to a line,
it will replace the default one. If you attempt to apply an undefined method list, you will be notified that
the command accounting on this line is ineffective until the method list is defined.
Configuration
Examples
The following example defines a command accounting method list named cmd to authorize level 15
commands, and uses TACACS+ as the security server. The none method will be used if the server
does not respond. The configured method list is applied to the VTY 0 – 4 line.
Ruijie(config)# aaa accounting commands 15 cmd group tacacs+ none
Ruijie(config)# line vty 0 4
Ruijie(config-line)# accounting commands 15 cmd
Command Description
aaa new-model
Enables the AAA security service.
Related
Commands
aaa accouting commands
Defines an AAA command accounting method list.
Platform
Description
N/A
accounting exec
Use this command to apply an EXEC accouting method list to the specified terminal line in line
configuration mode.
Use the no form of this command to disable the EXEC accounting function on the terminal line.
accounting exec { default | list-name }
To Next Page
Loading...
Need help?
General
