Ruijie RG-WLAN Series

Command Reference NFPP Commands
show nfpp arp-guard summary
Use this command to show the configurations.
show nfpp arp-guard summary
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# show nfpp arp-guard summary
(Format of column Rate-limit and Attack-threshold is
per-src-ip/per-src-mac/per-port.)
Interface Status Isolate-period Rate-limit Attack-threshold Scan-threshold
Global Enable 300 4/5/60 8/10/100 15
Gi 0/1 Enable 180 5/-/- 8/-/- -
Gi 0/2 Disable 200 4/5/60 8/10/100 20
Maximum count of monitored hosts: 1000
Monitor period:300s
Field Description
Interface(Global) Global configuration
Status Enable/Disable the anti-attack function.
Rate-limit In the format of the rate-limit threshold for the source IP address/ the rate-limit
threshold for the source MAC address/ the rate-limit threshold for the port
Attack-threshold In the same format as the rate-limit.
- No configuration.
Related
Commands
Command Description
arp-guard attack-threshold
Set the global attack threshold.
arp-guard enable
Enable the anti-ARP attack function.
arp-guard isolate-period
Set the global isolate time.
arp-guard monitor-period
Set the monitor period.
arp-guard monitored-host-limit
Set the maximum number of the monitored hosts.
arp-guard rate-limit
Set the global rate-limit threshold.