Command Reference WLAN Location Commands
WLAN Location Commands
wlocation enable
Use this command to enable the WLAN Location (WL) function on the specified AP. Use the no form
of this command to disable this function.
[ no ] wlocation enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Disabled
Command
mode
AP configuration mode on the fit AP or AC
Or:
Wlocation mode on the fat AP.
Usage Guide
N/A
Configuration
Examples
This example shows how to enable wireless location on the AP.
Ruijie(config-ap)# wlocation enable
This example shows how to disable wireless location on the AP.
Ruijie(config-ap)# wlocation enable
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
wlocation ae-ip x.x.x.x
Use this command to configure the IP address of the AE server connected with the specified AP.
[ no ] wlocation ae-ip x.x.x.x
Parameter
Description
Parameter Description
x.x.x.x
The IP address of AE
Defaults
0.0.0.0