Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
arp-guard enable
Use this command to enable the anti-ARP guard function globally.
arp-guard enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
Enabled.
Command
Mode
NFPP configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard enable
Related
Commands
Command Description
nfpp arp-guard enable
Enable the anti-ARP attack on the interface.
show nfpp arp-guard summary
Show the configurations.
Platform
Description
N/A
arp-guard isolate-period
Use this command to set the arp-guard isolate time globally.
arp-guard isolate-period { seconds | permanent }
Parameter
Description
Parameter Description
seconds
Set the isolate time, in seconds. The valid range is 0, or 30 to 86400.
permanent
Permanent isolation.
Defaults
The default isolate time is 0, which means no isolation.
Command
Mode
NFPP configuration mode.
Usage Guide
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English