Ruijie RG-WLAN Series Rgos Command Reference

Command Reference NFPP Commands
1.1.2.0 255.255.255.0
Total:2 record(s)
Related
Commands
Command Description
ip-guard trusted-host
Set the trusted host.
Platform
Description
N/A
show nfpp log
Use this command to show the NFPP log configuration.
show nfpp log summary
Use this command to show the NFPP log buffer area content.
show nfpp log buffer [ statistics ]
Parameter
Description
Parameter Description
statistics
Show the statistical information of the NFPP log buffer area.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
When the log buffer area is full, the subsequent logs are to be dropped, and an entry with all
attributes ”-” is displayed in the log buffer area. The administrator shall increase the capacity of the log
buffer area or improve the rate of generating the syslog.
The generated syslog in the log buffer area carries with the timestamp, for example:
%NFPP_ARP_GUARD-4-DOS_DETECTED:
Host<IP=N/A,MAC=0000.0000.0004,port=Gi4/1,VLAN=1> was detected.(2009-07-01 13:00:00)
Configuration
Examples
The following example shows the NFPP log configurations:
Ruijie#show nfpp log summary
Total log buffer size : 10
Syslog rate : 1 entry per 2 seconds
Logging:
VLAN 1-3, 5
interface Gi 0/1
interface Gi 0/2
The following example shows the log number in the buffer area:
Ruijie#show nfpp log buffer statistics

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English