Command Reference Basic Management Commands
aaa authentication login
Configures the login authentication method list.
Platform
Description
None
login local
If AAA is disabled, run the login local command to enable local user authentication on the interface.
The no form of this command is used to delete the line for local user authentication.
login local
no login local
Parameter Description
Parameter
Description
N/A N/A
Defaults None
Command
Mode
Line configuration mode
Usage Guide
If the AAA security server is inactive, this command is used for local user login authentication. The
user is allowed to use the username command.
Configuration
Examples
The following example shows how to set local user authentication on VTY.
Ruijie(config)# no aaa new-model
Ruijie(config)# username test password 0 test
Ruijie(config)# line vty 0
Ruijie(config-line)# login local
Command Description Related
Commands
username
Configures local user information.
Platform
Description
None
privilege mode
See the “Configuring CLI Authorization Commands” chapter.
To Next Page
Loading...
Need help?
General
