Command Reference RADIUS Commands
8 password 8
9 file-directory 9
10 file-count 10
11 file-name-0 11
12 file-name-1 12
13 file-name-2 13
14 file-name-3 14
15 file-name-4 15
16 max up-rate 75
17 version to server 17
18 flux-max-high32 18
19 flux-max-low32 19
20 proxy-avoid 20
21 dialup-avoid 21
22 ip privilege 22
23 login privilege 42
24 limit to user number 50
Command
Mode
Global configuration mode
Usage Guide
Use this command to configure the type value of a private attribute.
Configuration
Examples
The following example sets the type of max up-rate to 211.
Ruijie(config)# radius attribute 16 vendor-type 211
Command Description Related
Commands
radius set qos cos
Sets the qos value sent by the RADIUS server as the cos
value of the interface.
Platform
Description
N/A
radius-server attribute 31
Use this command to specify the MAC-based format of the RADIUS Calling-Station-ID attribute in
global configuration mode.
Use the no form of this command to restore to the default value.
radius-server attribute 31 mac format {ietf | normal | unformatted}
no radius-server attribute 31 mac format
Parameter Description Parameter
Description
ietf
Standard format specified by the IETF (RFC3580). The