Command Reference DHCPv6 Commands
Command
Mode
Privileged EXEC mode.
Usage Guide
The server, client and relay on the same device share a DUID.
Configuration
Examples
Ruijie# show ipv6 dhcp
This device's DHCPv6 unique identifier(DUID): 00:03:00:01:00:d0:f8:22:33:b0
Command Description
N/A N/A
Related
Commands
Platform
Description
N/A
show ipv6 dhcp binding
Use this command to show the address binding information for the DHCPv6 server.
show ipv6 dhcp binding [ ipv6-address ]
Parameter Description Parameter
Description
ipv6-address
Set the IPv6 address or the prefix.
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
If the ipv6-address is not specified, all prefixes dynamically assigned to the client and IANA address
binding information are shown. If the ipv6-address is specified, the binding information for the
specified address is shown.
Configuration
Examples
Ruijie# show ipv6 dhcp binding
Client DUID: 00:03:00:01:00:d0:f8:22:33:ac
IAPD: iaid 0, T1 1800, T2 2880
Prefix: 2001:20::/72
preferred lifetime 3600, valid lifetime 3600
expires at Jan 1 2008 2:23 (3600 seconds)
Command Description Related
Commands
N/A N/A
Platform
Description
N/A