Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Wireless Security Commands
Ruijie(wlansec)# security static-wep-key encryption 40 ascii 1 12345
Or use the hexadecimal form, which has the same effect:
Ruijie(wlansec)# security static-wep-key encryption 40 hex 1 3132333435
Related
Commands
Command Description
security static-wep-key authentication { open |
share-key }
Configures the authentication method in the
static WEP security mode to open system
authentication or shared key authentication.
Platform
Description
The client cannot support a 128-bit WEP password if you use the Windows XP operating system in
the wireless client management software. If the client software does not support a 128-bit WEP
password, as Ruijie’s devices are configured with 128-bit encryption, the consequence is either the
client software cannot be associated with the wireless network or the data channel is unavailable,
depending on the authentication mode.
security wpa
The command is used to configure the authentication mode of a WLAN to WPA. This command has
no no prefix, and any configuration prefixed with no does not work at all. The command format is:
security wpa { enable | disable }
Parameter
Description
Parameter Description
enable
Indicates that you enable the WPA authentication mode.
disable
Indicates to disable the WPA authentication mode.
Defaults
N/A
Command
mode
WLAN security configuration mode.
Usage Guide
The command is used to enable the WPA authentication mode. Only after the WPA authentication
mode is enabled can encryption and authentication methods be configured in the WPA mode.
Otherwise, configuration is impossible. When you use the WPA authentication, you need to configure
an encryption method and an authentication method. If only an encryption or authentication method is
configured, or neither is configured, the wireless client cannot be associated with the wireless
network.
Configuration
Examples
The following example configures the authentication mode of WLAN1 to WPA.
Ruijie (config)#wlansec 1
Ruijie(wlansec)# security wpa enable
The following example disables the WPA authentication mode of WLAN1.
Ruijie (config)#wlansec 1

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English