Command Reference Web Authentication Commands
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
mode
Privileged EXEC mode
Usage Guide
Use this command to show the status of web authentication.
Configuration
Examples
#Show the authentication configuration and statistics on an interface.
Ruijie#show web-auth control
Port Control Server Name Authentication mode
Online User Count
------------------------- -------- --------------------- -----------------
Wlan 1 On gateway 0
......
Field Description
Port The parameter indicates a basic controlled unit.
Control
The parameter indicates whether Web authentication of the
controlled unit is enabled.
Authentication Mode Controlled type of Web authentication of the controlled unit.
Online User Count
The parameter indicates the number of current online users of the
controlled unit.
Related
Commands
Command Description
webauth
Enables Web authentication on WLAN.
Platform
Description
N/A
show web-auth user
Use this command to show the online information (including the IP address, interface, and online
hours) of all users or specified users
show web-auth user { { { all | intra | v1 | v2 } [ online-only ] [ start-from index ] [ display-amount ] } |
statistics | ip-address { ip-address | ipv6-address } }
Parameter
Description
Parameter Description