Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Web Authentication Commands
web-auth portal key
Use this command to set communication key used between the device and portal server. Use the no
form of this command to delete the key for communication between new Web requests and the
authentication server after the HTTP Web request is redirected.
web-auth portal key key-string
no web-auth portal key
Parameter
Description
Parameter Description
key-string
This parameter indicates the communication key used between the
device and the authentication server, the maximum length is 255
bytes.
Defaults
By default, no key is set.
Command
mode
Global configuration mode
Usage Guide
Configuration of this parameter is required for the first generation Web authentication
Configuration
Examples
#Set the communication key used between device and authentication server as ruijie.
Ruijie(config)# web-auth portal key ruijie
Related
Commands
Command Description
http redirect
Sets IP address of Ruijie first generation portal
server.
http redirect homepage
Sets authentication homepage address of
Ruijie first generation portal server.
webauth
Initiates Web authentication on WLAN.
Platform
Description
N/A
web-auth portal
Use this command to configure the web authentication version. In the case of the second-generation
web authentication, specify the name of Portal Server as well. Use the no form of this command to
restore the default settings. This command supports both the global mode and the WLAN security
mode. If no version is specified in the WLAN security mode, the system will by default use the version
configured in the global mode.
web-auth portal { eportalv1 | eportalv2 | iportal | portal-name }

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English