Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCPv6 Commands
Configuration
Examples
Ruijie(config-dhcp)# iana-address prefix 2008:50::/64 lifetime 2000
1000Ruijie(config-if)# ip verify urpf drop-rate notify
Command Description
ipv6 dhcp pool
Set the DHCPv6 pool.
Related
Commands
show ipv6 dhcp pool
Show the DHCPv6 pool information.
Platform
Description
N/A
ipv6 dhcp client pd
Use this command to enable the DHCPv6 client and request for the prefix address information. Use
the no form of this command to disable the prefix address request
ipv6 dhcp client pd prefix-name [ rapid-commit ]
no ipv6 dhcp client pd
Parameter Description
prefix-name
Define the IPv6 prefix name.
rapid-commit
Allow the simplified interaction process.
Parameter
Description
Defaults
Disabled
Command
Mode
Interface configuration mode.
Usage Guide
With the DHCPv6 client mode disabled, use this command to enable the DHCPv6 client mode on the
interface.
With the ipv6 dhcp client pd command enabled, the DHCPv6 client sends the prefix request to the
DHCPv6 server
The keyword rapid-commit allows the client and the server two-message interaction process. With
this keyword configured, the solicit message sent by the client includes the rapid-commit item.
Configuration
Examples
The following example shows how to enable the prefix information request on the interface:
Ruijie(config)# interface fastethernet 0/1
Ruijie(config-if)# ipv6 dhcp client pd pd_name
Command Description Related
Commands
clear ipv6 dhcp client
Reset the DHCPv6 client function on the
interface.
show ipv6 dhcp interface
Show the DHCPv6 interface configuration.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English