Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Basic Management Commands
banner login
To configure the login banner, run the banner login command in clobal configuration mode. Use the
no banner login command to remove the configuration.
banner login c message c
Parameter Description
c
Separator of the message contained in the login banner.
Delimiters are not allowed in the MOTD.
Parameter
Description
message
Contents of the login banner
Defaults
None
Command
Mode
Global configuration mode
Usage Guide
This command sets the login banner message, which is displayed at login. The system discards all
the characters next to the terminating symbol.
Configuration
Examples
The following example shows how to configure the login banner:
Ruijie(config)# banner login $ enter your password $
Command Description Related
Commands
N/A N/A
Platform
Description
None
banner motd
To set the Message-of-the-Day (MOTD), run the banner motd command in global configuration
mode. To delete the MOTD setting, run the no banner motd command.
banner motd c message c
Parameter Description
c
Separator of the MOTD. Delimiters are not allowed in the MOTD.
Parameter
Description
message
Contents of an MOTD
Defaults
None
Command
Mode
Global configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English