Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SSH Commands
Parameter Description Parameter
Description
rsa
Deletes the RSA key.
dsa
Deletes the DSA key.
Defaults
N/A.
Command
Mode
Global configuration mode
Usage Guide
Use this command to delete the public key on the SSH server. After the key is deleted, the SSH
server state becomes DISABLE. If you want to disable the SSH server, run the no enable service
ssh-server command.
Configuration
Examples
Ruijie# configure terminal
Ruijie(config)# crypto key zeroize rsa
Command Description Related
Commands
show ip ssh
Displays the current status of the SSH server.
crypto key generate { rsa|dsa }
Generates the DSA and RSA keys.
Platform
Description
N/A
ip ssh authentication-retries
Use this command to set the user authentication retry times of the SSH server.
Use the no form of this command to restore to the default setting.
ip ssh authentication-retries retry times
no ip ssh authentication-retries
Parameter Description Parameter
Description
retry times
User authentication retry times, in the range from 0 to 5
Defaults The default authentication retry times are 3. You can use the no ip ssh authentication-retries
command to restore to the default value.
Command
Mode
Global configuration mode
Usage Guide
User authentication is considered failed if authentication is not successful when the configured
authentication retry times on the SSH server are exceeded. Use the show ip ssh command to view
the configuration of the SSH server.
Configuration
The following example sets the user authentication retry times to 2.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English