Command Reference WIDS Commands
Configuration
Examples
#Show the dynamic blacklist.
Ruijie# show wids blacklist dynamic
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
show wids detected
Use this command to show the devices detected in a WLAN.
show wids detected { adhoc | all | friendly ap | interfering ap | rogue { adhoc-ap | ap | client |
config-ap | ssid-ap } | mac-address H.H.H }
Parameter
Description
Parameter Description
adhoc
Shows the detected ad-hoc network.
all
Shows all devices detected in a WLAN.
friendly ap
Shows the detected friendly AP.
interfering ap
Shows the detected interference AP.
rogue adhoc-ap
Shows the detected Rogue ad-hoc AP.
rogue ap
Shows the detected Rogue AP.
rogue client
Shows the detected Rogue Client.
rogue config-ap
Shows the detected Rogue config AP.
rogue ssid -ap
Shows the detected Rogue SSID AP.
mac-address H.H.H
Shows the detected device with the source MAC address H.H.H.
Defaults
N/A
Command
mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
#Show the Rogue AP detected in a WLAN.
Ruijie# show wids detected rogue ap
Related
Commands
Command Description
N/A N/A