Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCP Relay Commands
DHCP Relay Commands
ip dhcp relay check server-id
Use this command to enable the ip dhcp relay check server-id function. Use the no form of this
command to disable the ip dhcp relay check server-id function.
ip dhcp relay check server-id
no ip dhcp relay check server-id
Parameter
Description
Parameter Description
N/A N/A
Defaults The ip dhcp relay check server-id function is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
Use this command to select the destination DHCP server according to server-id option when
forwarding a DHCP request. If this comand is not configured, the DHCP request is forwarded to all
DHCP servers.
Configuration
Examples
The following example enables the ip dhcp relay check server-id function.
Ruijie# configure terminal
Ruijie(config)# ip dhcp relay check server-id
Related
Commands
Command Description
service dhcp
Enables the DHCP Relay.
Platform
Description
This command is only supported by the switches.
ip dhcp relay information option dot1x
Use this command to enable the dhcp option dot1x function of DHCP relay.
Use the no form of the command to disable the dhcp option dot1x function.
ip dhcp relay information option dot1x
no ip dhcp relay information option dot1x
Parameter
Parameter Description

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English