Ruijie RG-WLAN Series

Command Reference RADIUS Dynamic Authorization Extension Commands
Related
Commands
Command Description
show radius dynamic-authorization-extension
statistics
Shows statistics about RADIUS dynamic
authorization extension.
Platform
Description
N/A
radius dynamic-authorization-extension enable
Use this command to enable RADIUS dynamic authorization extension. Use the no form of this
command to disable this function.
radius dynamic-authorization-extension enable
no radius dynamic-authorization-extension enable
Parameter
Description
Parameter Description
N/A N/A
Defaults
RADIUS dynamic authorization extension is disabled by default.
Command
mode
Global configuration mode
Usage Guide
Check whether RADIUS dynamic authorization extension can be properly enabled or disabled.
Configuration
Examples
#Enable RADIUS dynamic authorization extension.
Ruijie(config)# radius dynamic-authorization-extension enable
Related
Commands
Command Description
show running-config
Checks whether RADIUS dynamic
authorization extension is enabled.
Platform
Description
N/A
radius dynamic-authorization-extension port
Use this command to set a UDP port for receiving packets about RADIUS dynamic authorization
extension. Use the no form of this command to remove the setting.
radius dynamic-authorization-extension port num
no radius dynamic-authorization-extension port