Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Basic Management Commands
Description
ip telnet source-interface
To specify the IP address of an interface as the source address for Telnet connection, use the ip
telnet source-interface command in global configuration mode:
ip telnet source-interface interface-name
Keyword Description
Parameter
Description
interface-name
Specifies the IP address of the interface as the source address for
Telnet connection.
Defaults
None
Command
Mode
Global configuration mode
Usage Guide
This command is used to specify the IP address of an interface as the source address for global
Telnet connetction. When using the telnet command to log in a Telnet server, apply the global setting
if no source interface or source address is specified. Use the no ip telnet source-interface
command to restore it to the default setting.
Configuratio
n Examples
The following example specifies the IP address of the Loopback1 interface as the source address
for global Telnet connection.
Ruijie(Config)# ip telnet source-interface Loopback 1
Command Description Related
Commands
telnet
Logs in a Telnet server.
Platform
Description
None
lock
To set a temporary password for the terminal, run the lock command in EXEC mode .
lock
Parameter Description
Parameter
Description
N/A N/A
Defaults
None

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English