Ruijie RG-WLAN Series Rgos Command Reference

Command Reference DHCP Relay Commands
no ip dhcp relay information option82
Parameter
Description
Parameter Description
N/A N/A
Defaults
The option82 function of DHCP relay is disabled by default.
Command
Mode
Global configuration mode
Usage Guide
This function is exclusive with the option dot1x function.
Configuration
Examples
The following example enables the option82 function on the DHCP relay.
Ruijie# configure terminal
Ruijie(config)# Ip dhcp relay information option82
Related
Commands
Command Description
service dhcp
Enables the DHCP Relay.
ip dhcp relay information option dot1x
Enables the DHCP option dot1x function.
Platform
Description
This command is only supported by switches.
ip dhcp relay suppression
Use this command to enable the DHCP relay suppression function on a specified interface. Use the
no form of this command to disable ththis function.
ip dhcp relay suppression
no ip dhcp relay suppression
Parameter
Description
Parameter Description
N/A N/A
Defaults
The function is disabled by default.
Command
Mode
Interface configuration mode
Usage Guide
After this command is executed, the system will not relay the DHCP request message on the
interface.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English