Command Reference Web Authentication Commands
iportal service
Use this command to set the names of the intranet and extranet service types of the built-in Portal
server.
iportal service { internet service-name | local service-name }
no iportal service { internet | local }
Parameter
Description
Parameter Description
service-name
The parameter indicates the name of the service, which is a string of
characters.
Defaults
By default, the name of the Internet service is “internet”, and the name of local service is “local”.
Command
mode
Global configuration mode
Usage Guide
The field must be identical with the intranet and extranet service names configured on SAM. By
default, they can be used mutually. You need to configure the same name as the SAM when the
device is self-defined.
Configuration
Examples
#Set the service name of the extranet as intranet.
Ruijie(config)# iportal service internet intranet
Related
Commands
Command Description
show running-config
Shows the system configuration.
Platform
Description
N/A
iportal user-agent
Use this command to configure the terminal identification policy and identify a specific terminal as a
mobile terminal based on the feature string.
iportal user-agent name type mobile strin
no iportal user-agent name
Parameter
Description
Parameter Description
name
This parameter indicates the name specified for the UA configured.
string
This parameter indicates the UA feature string for identification.