Ruijie RG-WLAN Series Rgos Command Reference

Command Reference SNTP Commands
Description
seconds
Synchronization interval in the range 60 to 65535 seconds
Defaults
The interval is 1800 seconds by default.
Command
Mode
Global configuration mode
Usage Guide The show sntp command shows SNTP parameters.
The interval will take effect after the sntp enable command is executed.
Configuration
Examples
Ruijie(config)# sntp interval 3600
Related
Commands
Command Description
sntp enable
Enables SNTP.
show sntp
Shows the SNTP configuration.
clock update-calendar
Synchronizes the software clock with the
hardware clock.
Platform
Description
N/A
sntp server
Use this command to set the SNTP server. You can configure the SNTP server as the public NTP
server on the Internet, since SNTP is completely compatible with NTP.
sntp server ip-address
no sntp server
Parameter
Description
Parameter Description
ip-address IP address of the NTP/SNTP server.
Defaults
No NTP/SNTP server is configured by default.
Command
Mode
Global configuration mode
Usage Guide The show sntp command shows SNTP parameters.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English