Command Reference RADIUS Commands
Examples
Ruijie(config)# radius vendor-specific extend
Command Description
radius attribute
Configures the private vendor type.
Related
Commands
radius set qos cos
Configures whether the qos value sent by the
RADIUS server to the cos value of an interface.
Platform
Description
N/A
debug radius
Use this command to turn on the RADIUS debugging switch.
Use the no form of this command to turn off the RADIUS debugging switch.
debug radius {event | detail}
no debug radius {event | detail}
Parameter Description Parameter
Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC configuration mode
Usage
Guide
N/A
Configurati
on
Examples
N/A
Command Description Related
Commands
N/A N/A
Platform
Description
N/A
show radius parameter
Use this command to query the global parameters of the RADIUS server.
show radius parameter