Ruijie RG-WLAN Series Rgos Command Reference

Command Reference WIDS Commands
Defaults
This function is disabled by default.
Command
mode
WIDS configuration mode.
Usage Guide
N/A
Configuration
Examples
#Enable the device countermeasures.
Ruijie(config)# wids
Ruijie(config-wids)# countermeasure enable
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported on ACs and fat APs.
countermeasures mode
Use this command to configure the device countermeasures mode. Use the no form of this command
to restore the default countermeasures mode.
countermeasures mode { SSID | rogue | adhoc | config }
no countermeasure mode
Parameter
Description
Parameter Description
SSID
The parameter indicates the SSIDs that are detected by the
countermeasures and are not on the same AC.
rogue
The parameter indicates that only detected rogue devices are
subjected to the countermeasures.
adhoc
The parameter indicates that only detected adhoc devices are
subjected to the countermeasures.
config
The parameter indicates that only the devices configured in the static
attack list are subjected to the countermeasures.
no
The parameter indicates that the current countermeasures mode is
cancelled.
Defaults
N/A
Command
mode
WIDS configuration mode.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English