Command Reference i-Share Antenna Feeder Commands
Command
Mode
Privileged EXEC Mode.
Usage Guide
Use this command to display the feeder status.
Configuration
Examples
The following example displays the feeder status:
ruijie# Show antenna all
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported only in RGOS10.4(1T19) and the laters. This command is supported only
on the AP220-E(M) v3.0 and above.
show sntenna single
Use this command to display antenna feeder status of a single AP.
show antenna single ap-name
Parameter
Description
Parameter Description
ap-name The name of a single AP.
Defaults
N/A
Command
Mode
Privileged EXEC Mode.
Usage Guide
Use this command to display the feeder status.
Configuration
Examples
The following example displays the feeder status:
ruijie# Show antenna single ap-name
Related
Commands
Command Description
N/A N/A
Platform
Description
This command is supported only in RGOS10.4(1T19) and the laters. This command is supported only
on the AP220-E(M) v3.0 and above.