Command Reference RADIUS Dynamic Authorization Extension Commands
show running-config
Shows the configuration.
radius dynamic-authorization-extension
attribute check
Enables the function of checking the
event-timestamp attribute of packets about
RADIUS dynamic authorization extension.
Platform
Description
N/A
radius dynamic-authorization-extension attribute check
Use this command to enable the function of checking the event-timestamp attribute of packets about
RADIUS dynamic authorization extension. Use the no form of this command to disable this function.
radius dynamic-authorization-extension attribute check event-timestamp
no radius dynamic-authorization-extension attribute check event-timestamp
Parameter
Description
Parameter Description
N/A N/A
Defaults The function of checking the event-timestamp attribute of packets about RADIUS dynamic
authorization extension is disabled by default.
Command
mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
#Enable the function of checking the event-timestamp attribute of packets about RADIUS dynamic
authorization extension:
Ruijie(config)# radius dynamic-authorization-extension attribute check
event-timestamp
Related
Commands
Command Description
show running-config
Shows the configuration.
radius dynamic-authorization-extension
event-timestamp interval
Sets the timeout time for the event-timestamp
attribute of packets about RADIUS dynamic
authorization extension.
Platform
Description
N/A