Ruijie RG-WLAN Series

Command Reference NFPP Commands
Related
Commands
Command Description
nfpp ip-guard policy
Set the rate limit and the attack threshold.
show nfpp ip-guard summary
Show the configurations.
Platform
Description
N/A
ip-guard scan-threshold
Use this command to set the global scan threshold.
ip-guard scan-threshold pkt-cnt
Parameter
Description
Parameter Description
pkt-cnt
Set the scan threshold, in the range of 1 to 9999.
Defaults
The default scan threshold is 100, in 10 seconds.
Command
Mode
NFPP configuration mode.
Usage Guide
N/A
Configuration
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# ip-guard scan-threshold 2
Related
Commands
Command Description
nfpp ip-guard scan-threshold
Set the scan threshold on the port.
show nfpp ip-guard summary
Show the configurations.
Platform
Description
N/A
ip-guard trusted-host
Use this command to set the trusted hosts free form monitoring.
ip-guard trusted-host ip mask
no ip-guard trusted-host { all | ip mask }
Parameter
Parameter Description