Command Reference NFPP Commands
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
Use this command without the parameter to clear all monitored hosts.
Configuration
Examples
Ruijie# clear nfpp ip-guard hosts vlan 1 interface g0/1
Related
Commands
Command Description
ip-guard attack-threshold
Set the global attack threshold.
nfpp ip-guard policy
Set the limit threshold and attack threshold.
show nfpp ip-guard hosts
Show the monitored host.
Platform
Description
N/A
clear nfpp log
Use this command to clear the NFPP log buffer area.
clear nfpp log
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
Ruijie# clear nfpp log
32 log-buffer entries were cleared.
Related
Commands
Command Description
show nfpp log
Show the NFPP log configurations or the log
buffer area.
Platform
N/A
To Next Page
Loading...
