Ruijie RG-WLAN Series

Command Reference TACACS+ Commands
debug tacacs+
no debug tacacs+
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
N/A
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
ip tacacs source-interface
Use this command to configure the source IP address of TACACS+ packet.
ip tacacs source-interface interface
no ip tacacs source-interface
Parameter
Description
Parameter Description
interface
Source IP address interface of the TACACS+ packets
Defaults
Source IP address of TACACS+ packets is set on the network layer.
Command
Mode
Global configuration mode.
Usage Guide
To decrease the work of maintaining massive NAS messages in the TACACS+ server, use this
command to set the source IP address of TACACS+ packets. This command specifies the first ip
address of the specified interface as the source IP address of TACACS+ packets and is used on L3
devices.