Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
Usage Guide
None.
Configuration
Examples
Ruijie(config)# no ipv6 ns-linklocal-src
Command Description Related
Commands
N/A N/A
Platform
Description
N/A
ipv6 redirects
Use this command to control whether to send ICMPv6 redirect message when the switch receives
and forwards an IPv6 packet through an interface. Use the no form of this command to disable the
function.
ipv6 redirects
no ipv6 redirects
Parameter Description Parameter
Description
N/A N/A
Defaults
The ICMPv6 redirect message is permitted to be sent on the IPV6 interface.
Command
Mode
Interface configuration mode.
Usage Guide
The transmission rate of any ICMPv6 error message is limited. By default, it is 10pps.
Configuration
Examples
Ruijie(config-if)# ipv6 redirects
Command Description Related
Commands
show ipv6 interface
Show the interface information.
Platform
Description
N/A
ipv6 route
Use this command to configure an IPv6 static route. Use the no form of this command to remove the
setting.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English