EasyManuals Logo

Ruijie RG-WLAN Series Rgos Command Reference

Ruijie RG-WLAN Series
657 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #353 background imageLoading...
Page #353 background image
Command Reference IPv6 Commands
ipv6 route [ vrf vrf-name ] ipv6-prefix/prefix-length {ipv6-address [ nexthop-vrf { vrf-name1 |
default } ] | interface-id [ ipv6-address [ nexthop-vrf { vrf-name1 | default } ] ] } [distance ] [ weight
number ]
Parameter Description Parameter
Description
ipv6-prefix
IPV6 network number following the format specified in RFC4291.
prefix-length: Length of the IPv6 prefix. “/” must be added in front of the prefix.
vrf-name
VRF in the routes, which must be the multi-protocol VRF with the IPv6 address
family configured.
ipv6-address
Next-hop IP address to the destination address. It shall be in the format defined in
RFC4291. The next-hop IP address and the next-hop outgoing interface can be
specified at the same time. Note that if the next-hop IP address is a link-local
address, the outgoing interface must be specified.
vrf-name1
VRF in the nexthop, which must be the multi-protocol VRF with the IPv6 address
family configured.
default
The nexthop belongs to the global.
interface-id
The outgoing interface toward the destination network. If the static route is
configured with the outgoing interface but no next-hop address is specified, the
destination address will be considered on the link connected with the outgoing
interface; that is to say, the static route will be treated as a directly-connected
route. Note that if the destination network or next-hop address is a link-local
address, the outgoing interface must be specified.
Defaults
N/A
Command
Mode
Global configuration mode.
Usage Guide
If the destination IP address or next-hop IP address is a link-local IP address, the outgoing interface
must be specified; if the destination address is a link-local IP address, the next-hop must be also a
link-local IP address. When configuring a route, the destination IP address and the next-hop IP
address shall not be a multicast address. If both the next hop IP address and the outgoing interface
are specified, the outgoing interface of the direct route that matches the next hop shall be the same
as the configured outgoing interface. 2.
Configuration
Examples
Ruijie(config)# ipv6 route 2001::/64 vlan 1 2005::1
Command Description Related
Commands
show ipv6 route
Show the IPv6 route information.
Platform
Description
N/A

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals