Ruijie RG-WLAN Series

Command Reference 802.1X Commands
the authentication failure The range is from 0 to 65535, in seconds.
Defaults
10 seconds.
Command
Mode
Global configuration mode.
Usage Guide
When authentication fails, the solicitator must wait for a period of time before reauthentication.
Configuration
Examples
The following example sets the time for waiting re-authentication to 1000s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout quiet-period 1000
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status: Enabled
Authentication mode: EAP-MD5
Authed User Number: 0
Re-authen Enabled: Disabled
Re-authen Period: 3600 sec
Quiet Timer Period: 1000 sec
Tx Timer Period: 3 sec
Supplicant Timeout: 3 sec
Server Timeout: 5 sec
Re-authen Max: 3 times
Maximum Request: 3 times
Filter Non-RG Supp: Disabled
Client Oline Probe: Disabled
Eapol Tag Enable: Disabled
Authorization Mode: Group Server
Related
Commands
Command Description
show dot1x Shows the information about 802.1x.
Platform
Description
N/A
dot1x timeout re-authperiod
Use this command to set re-authentication interval when re-authentication is enabled. Use the no
form of the command to restore it to the default value.
dot1x timeout re-authperiod seconds