Command Reference Wireless Security Commands
show wclient security
The command is used to display security configuration of a wireless client. It takes the form as
follows:
Show wclient security mac-address
Parameter
Description
Parameter Description
mac-address
Indicates the MAC address of the wireless client to be shown, in the
format of H.H.H.
Defaults
N/A
Command
mode
Privileged mode.
Usage Guide
N/A
Configuration
Examples
The following example displays the security configuration of wireless client 1 with a MAC address of
0023.cdad.d3d5.
Ruijie# show wclient security 0023.cdad.d3d5
Security policy finished :TRUE
Security policy type :WPA-802.1X
Security cipher mode :CCMP
Security EAP type :NONE
Security NAC status :CLOSE
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
To Next Page
Loading...
