Command Reference IP Address Commands
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
show ip pool
Use this command to display an IP address pool of the system.
show ip pool [ pool-name ]
Parameter
Description
Parameter Description
pool-name
Address pool name
Defaults
N/A
Command
Mode
Privileged user mode
Usage Guide
N/A
Configuration
Examples
The following example shows the output result of the show ip pool command.
Ruijie#show ip pool
Pool Begin End Free In use
aaa 1.1.1.1 1.1.1.200 200 0
ccc 2.2.2.2 2.2.2.211 210 0
Related
Commands
Command Description
ip local pool
Configures the IP address pool.
Platform
Description
This command is not supported on switches.