Ruijie RG-WLAN Series Rgos Command Reference

Command Reference Dot11 Radio Commands
no antenna { receive | transmit }
Parameter
Description
Parameter Description
no
Deletes settings for antennas.
chain-mask
Specifies the antenna selection mask. The range is from 1 to 7.
Defaults
The default antenna selection mask varies with product models and the number of antennas. The
default setting depends on the product model.
Command
mode
Dot11radio interface configuration mode
Usage Guide
N/A
Configuration
Examples
# Set the transmitting and receiving mask.
Ruijie(config)#interface dot11radio 1/0
Ruijie(config-if-Dot11radio 1/0)# antenna transmit 7
Ruijie(config-if-Dot11radio 1/0)# antenna receive 7
Related
Commands
Command Description
N/A N/A
Platform
Description
N/A
beacon dtim-period
Use this command to set a DTIM period for beacon frames.
beacon dtim-period seconds
no beacon dtim-period
Parameter
Description
Parameter Description
no
Deletes the setting of DTIM period.
seconds
Specifies the DTIM period. The unit is one beacon period. The range
is from 1 to 255.
Defaults
The default DTIM period is 1 beacon period.
Command
mode
Dot11radio interface configuration mode

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English