Command Reference 802.1X Commands
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example set the redirect connection number as 3:
Ruijie(config)# dot1x redirect num for special source-ip 3
Related
Commands
Command Description
dot1x redirect url
Sets the redirect url address.
dot1x redirect for special tcp-destination port
Sets the specific destination port and redirect
the web request for the destination IP.
dot1x redirect time-out
Sets the timeout time maintaining the redirect
connection.
show dot1x
Shows the dot1x redirection information.
Platform
Description
N/A
show dot1x
Use this command to display the information about 802.1x setting.
show dot1x
Parameter
Description
Parameter Description
N/A N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A
Configuration
Examples
The following example shows the information about 802.1x:
Ruijie# show dot1x
802.1X Status: Enabled
Authentication Mode: EAP-MD5