Ruijie RG-WLAN Series Rgos Command Reference

Command Reference IPv6 Commands
Command
Mode
Interface configuration mode.
Usage Guide
This flag determines whether the host that receives the RA message obtains an IP address through
stateful auto configuration. If the flag is set, the host obtains an IP address through stateful auto
configuration, otherwise it does not be used.
Configuration
Examples
Ruijie(config-if)# ipv6 nd managed-config-flag
Command Description Related
Commands
show ipv6 interface
Show the interface information.
ipv6 nd other-config-flag
Set the flag for obtaining all information except IP address
through stateful auto configuration.
Platform
Description
N/A
ipv6 nd ns-interval
Use this command to set the interval for the interface to retransmitting NS (Neighbor Solicitation). Use
the no form of this command to restore it to the default setting.
ipv6 nd ns-interval milliseconds
no ipv6 nd ns-interval
Parameter Description Parameter
Description
milliseconds
Interval for retransmitting NS in the range of 1000 to 429467295 milliseconds
Defaults
The default value in RA is 0 (unspecified); the interval for retransmitting NS is 1000ms(1s).
Command
mode
Interface configuration mode.
Usage Guide
The configured value will be advertised through RA and will be used by the device itself. It is not
recommended to set a too short interval.
Configuration
Examples
Ruijie(conifig-if)# ipv6 nd ns-interval 2000
Command Description Related
Commands
show ipv6 interface
Show the interface information.
Platform
Description
N/A

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English