Command Reference DHCP Snooping Commands
DHCP snooping Support Bootp bind status: ENABLE
Interface Trusted Rate limit (pps)
------------------------ ------- ------------
Related
Commands
Command Description
ip dhcp snooping
Enable the DHCP snooping globally.
ip dhcp snooping verify mac-address
Enable the check of source MAC address of
DHCP Snooping packets.
ip dhcp snooping write-delay
Set the interval of writing user information to
FLASH periodically.
ip dhcp snooping information option
Add option82 to the DHCP request message.
ip dhcp snoooping bootp-bind
Enable the DHCP snooping bootp bind
function.
ip dhcp snooping trust
Set the port as a trust port.
Platform
Description
N/A.
show ip dhcp snooping binding
Use this command to view the information of the DHCP snooping binding database.
show ip dhcp snooping binding
Parameter
Description
Parameter Description
N/A. N/A.
Defaults
N/A.
Command
Mode
Privileged EXEC mode.
Usage Guide
N/A.
Configuration
Examples
Show the information of the DHCP Snooping binding database.
Ruijie# show ip dhcp snooping binding
Total number of bindings: 1
MacAddress IpAddress Lease Type VLAN Interface
00d0.f801.0101 192.168.1.1 - static 1 fastethernet 0/1
Related
Commands
Command Description